Product details
Standard |
ASTM,GB,DIN,JIS,API |
Caliber |
0.5 - 20 Mm |
Application |
Fluid tube, structure, boiler tube, chemical industry, construction, etc. |
Degree |
A53(A,B),45 # |
Technology |
steel laminate (cold or hot) |
Standard 2 |
API 5L,API 5CT,ASTM A106-2006,ASTM A53-2007,DIN 2391 |
Surface treatment |
Galvanized,3PE, black paint, custom |
Length |
1-12m or depending on your needs |
Grade group |
10-45o,A53-A369,ST35-ST52 |
Way |
Round |
Alloy |
No |
Diameter |
20 - 610 Mm |
Species |
Api |
||
Name |
seamless steel pipe |
Type |
seamless |
Seamless steel tube/Coated steel tube/Carbon steel tube
Product detail
Name |
Seamless steel tube |
Standard |
API 5L, ASME, ASTM B36, JIS, DIN, GB8162, GB8163, GB5310, etc. |
Matter |
ASTM A106 GRB/ A53 GRB/ A192/A179/API 5L GRB/ Q345/ ST42/ST37/ ST52/GB816320 # |
Type |
Seamless Steel Tube/Coated Steel Tube/Carbon Steel Tube |
Production process: |
steel laminate (cold or hot) |
Diameter |
DN15-DN900, 1/2"-36", 21.3mm-916mm |
Surface treatment |
Black paint, black varnish, clear oil, hot galvanized, 3PE, epoxy coating, BE, PE. Etc. |
Utility |
1. Electrical industry 2. Chemical industry 3. Oil and natural gas industry 4. Boiler tube 5. Coating tube 6. Low- and medium-pressure fluid transport tube |
ASTM A106 Grade B Seamless Pressure Tube (ASME SA106) is used in power plants, boilers, petrochemical plants, oil and gas refineries and ships where the pipe must carry fluids and gases that exhibit high pressures and temperatures.
Chemical composition in %
Carbon (C) max. For grade A 0.25, for grade B 0.30, grade C 0.35
Manganese (Mn): 0.27-0.93, 0.29-1.06
Sulphur (S) Max: ≤ 0.035
Phosphorus (P): ≤ 0.035
Silicon (Yes) Min: ≥0.10
Chromium (Cr): ≤ 0.40
Copper (Cu): ≤ 0.40
Molybdenum (Mo): ≤ 0.15
Nickel (Ni): ≤ 0.40
Vanadium (V): ≤ 0.08
Attention:
For each reduction of 0.01% carbon, an increase of 0.06% manganese above the specified value will be allowed, and up to a maximum of 1.35%.
The combined Cr, Cu, Mo, Ni, V elements shall not exceed 1%.
ASTM A106 Grade B Tube Dimensions
The standard covers tube sizes in NPS (National Standard Straight) from 1/8 to 48 inches (10.3 mm DN6 - 1219 mm DN1200), while meeting the nominal wall thickness of ASME B 36.10M. For other sizes, this standard specification is also allowed.
Grade B seamless tube
The seamless steel tube has three grades, i.e. ASTM A106 Gr.A. Grade. B and C, with the highest grade material, the resistance performance is better.
Testing methods
The testing methods for ASTM A106 A, B, C are flattening, hydrostatic testing, non-destructive electrical testing, ultrasonic testing, parasit current test, flow leak test, these test procedures will be reported or discussed with the customer to confirm what type of test will be applied.
http://www.en.gneeacero.com/